|
|
 |
|
|
WOW! - Add the convenience of a programmable controller to your existing kiln......and it's so easy! Simply plug your kiln into the AIM Controller Field Kit Box, put the
Field Kit thermocouple sensor in your kiln, and turn the kiln's switches to HIGH; now you have full digital control! |
|
|
|
|
|
The programmer will raise and/or lower the kiln temperature over a prescribed time, or at a prescribed rate. |
|
|
|
|
|
|
|
For precise and consistant temperature regulation of your kiln, giving you predictable and repeatable results use one of these fine kiln programmers: |
|
|
|
|
|
Fuji PXR-3: Digital set-point controller with 2 user defined four segment ramp/soak programs as well! Full PID control with Fuzzy Logic, autotune, compact
size. Easily change set-point temperature, start/stop/hold a program at any time; up to four temperatures, four ramp times and four hold times for each of two programs.. |
|
|
|
|
|
|
Three (3) Key controller by Bartlett Instruments: Memory for 4 user defined programs, and each program can have as many as 8 segments (up to 8
temperatures, 8 ramp rates and 8 hold times). Easy to use, affordable multi-program controller, ideal for fused glass, PMC and more! |
|
|
|
|
|
|
V6-CF: Full featured programmable controller by Bartlett Instruments. 10 key numbered key pad. Pyrometric cone schedules are pre-programmed (022 thru cone 10) with
four speed options for each. Additional memory for 6 separate user defined firing profiles
for repeated use. Each profile may have up to 8 segments with separate heating/cooling rates, temperatures set points and hold times. Multiple Zone Control: may be configured for one, two or even three zone control. Other features include; delay start, skip-a-step, alarm, and computer interface to run controller from your PC. |
|
|
